FULL SERVICE

Service Description

FULL SERVICE COVERS 1. Exterior Inspection Lights: Check headlights, brake lights, indicators, etc. for functionality Wipers and Washer Fluid: Inspect wiper blades, replace if necessary and top up washer fluid 2. Fluid Levels Engine Oil: Check level and condition before replace with manufacturer's recommendation specs Coolant/Antifreeze: Inspect levels, quality, replace if necessary. Brake Fluid: Ensure appropriate level and check for contamination or replace as needed Power Steering Fluid: Check level and refill if necessary Transmission Fluid: Inspect level and condition, replace if needed Differential Fluid (for AWD/4WD): Check level and replace if required 3. Engine and Components Battery: Test battery voltage and inspect terminals for corrosion. Belts and Hoses: Check for wear, cracks, or leaks Air Filter and Cabin Filter: Inspect for dirt and debris, and replace Spark Plugs: Check for wear and replace if needed to improve fuel efficiency Fuel System: Inspect for leaks and add a fuel injection cleaning additive if needed 4. Brakes Brake Pads and Discs: Inspect for wear and measure thickness, recommend replacement if necessary Brake Lines and Hoses: Check for leaks, cracks, or wear Parking Brake: Test functionality and adjust if required 5. Suspension and Steering Shocks and Struts: Check for leaks or damage Ball Joints and Tie Rods: Inspect for play and wear Steering Components: Check for smooth operation and no excessive play 6. Tires and Alignment Tire Tread Depth: Measure depth and check for uneven wear. Tire Pressure: Adjust to manufacturer-recommended levels. Wheel Alignment: Inspect for uneven wear, recommend alignment if needed Wheel Balance: Check for vibrations and rebalance if necessary. 7. Exhaust System Muffler and Pipes: Inspect for rust, holes, and leaks. Mounting Brackets: Ensure all brackets are secure 8. Interior and Electronics Dashboard Warning Lights: Scan for error codes and mention any issues Climate Control System: Test AC and heater functionality Seat Belts: Inspect locking mechanisms 9. Road Test Test Drive: Perform a road test to check for any unusual sounds, vibrations, or handling issues Braking Performance: Test for responsiveness and smooth stopping Steering and Suspension Feel: Ensure comfortable and stable handling on the road Every vehicle is unique, and we may add additional checks based on specific make or model requirements to ensure maximum performance and safety